Technical SupportHome >> Technical Support
The six reasons of Wood cnc router dislocation
Wood cnc router/Woodworking  CNC router engraving dislocation occurred during the phenomenon is often the case, because there exist many problems, there are many components involved, it is a more difficult problem to solve, after many years of practical experience, we summarize the following aspects for your reference:

    1, the drive causes: the drive itself or the electronic components inside the structure in question will cause dislocation, for this reason a maximum; if the number of occurrences is small, and the low rate of discharge, and sometimes normal engraving which shows no drive completely broken, if you start carving instructions on the drive has been completely misplaced bad, or worse, that you can repair the drive .

    2, the voltage reasons: at work required power, if the power supply voltage is too low to drive enough power to reach will cause dislocation, generally up to y-axis, this phenomenon may be the external voltage is not enough, Or someone on the same line using a high-power devices such as welding, etc., a good way to resolve this is to install a 50,000-watt power supply, but the power supply range of error can not exceed 5%, preferably less than 3% .

    3, interface boards, motherboard, adapter plate reasons: If the interface board, motherboard, adapter plate is broken, the machine at work in the process, in a certain direction or three axes are not moving, causing dislocation carving .

    4, the spindle motor reason: If the stepper motor or servo motor causes the machine is not moving in one direction, turn screw can be turned by hand does not move.

    5, the body's own reasons: a component on the machine in question or loose surface impurities also appear misplaced imagination, such as loose coupling, the bad, will appear misplaced, rails, screw on time does not Cleaning oil also appears dislocation .
 
    6, line engraving machine if the machine is broken this phenomenon also occurs .




Back: Proper handling advertising CNC engraving machine/

Next: What are common faults of CNC router

Keywords:CNC router,cutting plotter,Railroad fastener Copyright ©Jinan Hopetool CNC equipment Co.,Ltd. E-mail:Jackie@ht-cnc.net sitemap