Technical SupportHome >> Technical Support
What are common faults of CNC router

What are common faults of CNC router

A : one or three-axis does not move around or walking is not normal
    1: Control are loose or defective .
    2 : corresponding to the drive shaft of defects.
    3 : the corresponding axis stepper motor defects.
    4 : the corresponding couplings break out or loose .
    5 : the corresponding screw nut screw cracking or rendered defective .
    6: Relative to the axis of the slider presents defects.
    7 : Drive subdivision , current, and software set divergent samples .
    Two : z -axis control
    1: Control are loose or defective .
    2: static interference .
    3: z axis motor line defect
    4 : Files wrong way
    5 : Inverter interference
    6 : Computer systems have a question or a virus
    7 : Operational error
    Three: negligence
    1: Control are loose or defective
    2 : Drive defects
    3 : Stepper motor defects
    4: static interference
    5 : Motor line defect
    6 : Data line defect
    7: The wrong way
    8: cracked or loose coupling
    9 : Processing speed is too fast
    10 : The computer system questions or virus
    Four: polish shades divergent
    1: Control are loose or defective
    2 : Step defects close to the motor
    3 : Drive defects or current segmentation and software settings divergent caused
    4; z -axis motor line defect
    5 : Spindle motor defects
    6 : The inverter interference or data set incorrectly
    7: static interference
    8: computer virus or system questions
    Five: carve
    1: The control card defects
    2 : Inverter interference
    3: File wrong way
    4: static interference
    5 : The software provided with the questions
    6 : Drive defects or current breakdown is set incorrectly
    7 : Data line defect
    8 : The computer has a virus or system questions
    Six: Renunciation uneven
    1: The spindle and the table is not straight . Need proofreading
    2 : Tool doubt
    3: Control card in doubt
    Seven: spindle stop
    1 : Spindle internal short
    2: Current Shield
    3 : Inverter parameter settings are incorrect , or their own shortcomings
    4 : Control Card defects
    5: The main axis or data line short-circuit
    Eight: abnormal spindle dynamics change
    1 : The inverter is set incorrectly
    2: The spindle does not turn
    3: spindle itself in doubt
    Nine: When walking or Homing opposite direction
    1: In Notepad, change "public.dat" File
    2: Modify the inverter wiring methods
    3: Weihong software direction of the roll-out
   Ten : the machine can not be normal Homing
    1: in the opposite direction
    2: Control card defects or loose
    3 : Limit switch or data line defect
    4 : drive defects
    5: Step defects close to the motor
    Eleven : You can not take the initiative on the knife
    1: Control are loose or defective
    2 : The knife block line defect
    3: The appearance of the knife block with insulating material
    4: static interference
    5 : Software or computer questions
    Twelve : Spindle initiative forward or can not stop
    1: The control card defects
 
 


Back: The six reasons of Wood cnc router dislocation

Next: Using laser engraving machine precautions

Keywords:CNC router,cutting plotter,Railroad fastener Copyright ©Jinan Hopetool CNC equipment Co.,Ltd. E-mail:Jackie@ht-cnc.net sitemap