Technical SupportHome >> Technical Support
How to maintenance wood CNC router

Many people who have used wood CNC router(woodworking CNC router) usually think don't need  cleaning CNC router so cleanly, it can be said that basically do not control, when appropriate clean up the mesa on the line, why? Because they believe that wood CNC router working process itself is a lot of dust, That he himself is something of applications in the dust, if every day to clean up, and that the more trouble, so many people not only do not clean up, and let the machine filled with something, this practice is wrong.
 
1,Computer
 Regular killing the virus, but can not open the antivirus degree of attention to work carefully interference.
 
Regular cleaning of the dust of the chassis, and attention to the cooling of the chassis, carefully excessive dust caused by industrial control card error.
 
Regularly defragment the hard disk, optimize the computer system.
 
Computer abnormalities can also cause many problems, especially for connecting CNC router, we summarize our technical department maintenance found in the process of wood engraving machine, computer anomalies also give us repair caused a lot of unnecessary trouble, but also delay the customer's business, , asked the client computer maintenance attention to several aspects.
 
2,the clean-up
 
Regular cleaning of industrial control box, the biggest killer of dust on the circuit board.
 
Regular cleaning of the screw to prevent the screw on the stick of a foreign body, screw device is very important, he determines the accuracy of the machine, and the screw also play an important role in the transmission process.
 
Work is done timely clean countertops, which provides a convenient next to wood CNC router.
    Cleanup rail and the rail next to the material crumbs, to prevent the card machine cause the machine in the work process from debris interference.
 
3, oil
 
After the addition of oil, slow back and forth to ensure that the lubricant can be uniformly applied to the rail and screw.
 
Machine unused for long periods should periodically refuel empty go to ensure the flexibility of the transmission system.
 
First, clean up clean rail with screw, available in cloth (do not shed) clean out the oil on the rails and lead screw and material debris. Low temperatures, rail and screw add oil and antifreeze oil is best.
 
The refueling cycle twice a month, that is, every two weeks and once oil.
 
4, the temperature
 
Machine when not in use, if the room temperature is lower best pour the water in the tank to prevent the cracking of water tanks and water pipes.
 
The ambient temperature in the operating room, wood engraving machine is best to reach room temperature, at least the staff will not be cold.
 
View the fuel standard applicable temperature to reach at least the minimum temperature.
 
Temperature for wood cnc router is not very big, but because of the user to screw with butter, winter also forgot to clean-up, resulting in each boot failed to get off, and some studio temperature is too low, add the oil, can or frozen on the machine is not running.
 
5, cooling water
 
Conditional antifreeze cooling.
 
Pay attention to environmental temperature, be careful because the water temperature is too cold, the water tank and the pipe cracking.
 
The necessary condition for cooling water for the spindle motor work properly if the cooling water is too dirty motor can be caused by a serious injury, to ensure that the cleaning of the cooling water and pumps work properly.



Back: CNC router common solution to the problem

Next: Laser engraving machine, laser cutting machine app

Keywords:CNC router,cutting plotter,Railroad fastener Copyright ©Jinan Hopetool CNC equipment Co.,Ltd. E-mail:Jackie@ht-cnc.net sitemap